Using The Remote Controller (Rm-Rk50) - JVC KD-ABT22 Manual De Instrucciones

Ocultar thumbs Ver también para KD-ABT22:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the remote controller (RM-RK50)

Installing the lithium coin battery (CR2025)
Caution:
Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Remote sensor
Warning (to prevent accidents and damage):
• Do not install any battery other than CR2025 or its
equivalent.
• Do not leave the remote controller in a place (such as
dashboards) exposed to direct sunlight for a long time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, heat the battery,
or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
For USA-California Only:
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
1
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
• Switches the conversation media during a phone
call conversation.
2
• Changes the FM/AM bands with
• Changes the preset stations with D
• Changes the folder of the MP3/WMA/AAC/WAV.
• While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM)
radio:
– Changes the categories.
• While listening to an Apple iPod:
Connected to KS-PD100:
– Pauses or resumes playback with D
– Enters the main menu with
5
2
(Now
U/D
/
selecting buttons.)*
5
*
U : Returns to the previous menu.
D
: Confirms the selection.
Connected to the USB cable:
– Enter the main menu if pressed and held.
– Select the desired menu if pressed briefly.
– Fast skip in every layer of the main menu if
pressed and held.
OPERATIONS
5
U.
.
.
5
U.
3
R/F
work as the menu
Continued on the next page
7

Publicidad

Tabla de contenido
loading

Tabla de contenido