General Settings - Psm - JVC KD-ABT22 Manual De Instrucciones

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 32 – 34.
1
Enter the PSM settings.
2
Select a PSM category.
To display the rest
3
Select a PSM item.
By pressing either one of the buttons repeatedly,
you can also move to the item of the other
categories.
Category Indication
Demo
Display
demonstration
LevelMeter
Audio level meter
Clock Disp *
1
Clock display
*
1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "Off" to
save the car's battery.
4
5
6
Item Setting, [reference page]
( : Initial)
• On : Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
• Off : Cancels.
• Meter 1 : Select the different level meter patterns.
• Meter 2 • Press DISP to show the selected level meter.
• On : Clock time is shown on the display when the power is
turned off.
• Off : Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [5].
Adjust the selected PSM item.
Repeat steps 2 – 4 to adjust other PSM items
if necessary.
Finish the procedure.
Continued on the next page
SETTINGS 31