Technical Data; Specified Conditions Of Use; English; Emergency Procedure | Symbols | Maintenance | Disposal | Guarantee | Service - Gude SG 130 A Traducción Del Manual Original

Technical Data

Welder
Art. No
Degree of protection
Insulation class
Mains voltage
Mains frequency
Max. input
Protection, time delay
Idle voltage
max. Welding current
Regulated section Welding current
Number of switching steps
Switch-on time at max. electricity ( 230V )
Material thickness
Wire thickness (Flux cored electrode)
Dimensions L x W x H
Net/gross weight
Switch-on time determined at 40°C using simulation
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center

Specified Conditions of Use

The flux cored electrode welding device is exclusi-
vely intended for domestic use and is not suitable for
commercial use.
The flux cored electrode welding device is intended
for self-protecting flux cored electrode welding
using the correct wire.
No additional gas is required. The protective gas
is contained in the wire in powdered form, is thus
fed directly into the arc and this makes the device
resistant to wind when used outdoors.
Only wire electrodes which are suitable for the
device may be used.
Observing the safety instructions, the assembly in-
structions and the operating instructions in the user
manual also constitutes part of the proper use.
SG 130 A
20071
IP 21S
H
230 V
50 Hz
230 V ( 3,9 kVA )
16 A
32 V
230 V ( 120 A )
60 A - 120 A
None
120 A ~ 10 ~ %
1,5 - 8 mm
0,9 mm
350 x 190 x 320 mm
13,1 kg / 17 kg
The valid accident prevention regulations must be
adhered to strictly.
The welding device may not be used:
• in rooms that do not have sufficient ventilation
• in a damp or wet environment,
• in an explosive environment,
• to defrost pipes,
• close to people who have a pacemaker and
• close to flammable materials
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Since the use of the device if handled incorrectly can
entail considerable risks, only knowledgeable persons
may be entrusted with the use of it.
The operator must be appropriately trained in setting
up, operating and using the machine.
Qualification: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.

ENGLISH

19