Foreword; Ec Certification; Testing - Corghi ERCO 4004 Manual De Uso

2.0 FOREWORD

This manual includes the instructions relating to the installation, use and maintenance of the lift system called "Vehicle Lift". The vehicle lifts described in
this manual are designed and constructed solely to lift vehicles for repair, maintenance and inspection purposes. Lift operation, economy and duration
depend on the compliance with the instructions given in this manual. The parts that can be supplied also as spare parts are listed in the last section of
the manual. To make instructions reading easier, vehicle lift will be hereinafter simply called "lift".

2.1 EC CERTIFICATION

2006/42/EC Directive, commonly known as the "Machines Directive" specifies the conditions to be respected before a machine can be put into the
market. This Directive provides that all machines can be marketed and commissioned only if they do not jeopardise people, pets or property safety and
health. To certify lift compliance with Directive provisions, before marketing, the manufacturer subjected a machine specimen to the audit of a notified
body.
Lift, manufactured in compliance with 2006/42/EC Directive provisions, and can thus be marketed without jeopardising user's safety.
Lift is thus delivered to the customer with:
• EC Declaration of Conformity
• CE Marking
• Instructions for use
• Inspection records

2.1.1 TESTING

The lift has undergone static and dynamic tests based on the procedures included in the EN 1493:2010.
Concerning lift testing, please refer to the relevant section in the Inspection records.
The instructions given in this manual shall be compulsorily respected: the Manufacturer will not be held responsible under any circumstanc-
es arising from negligence, from non-compliance with the instructions and from an improper or inconsiderate use of the lift.
Failure to comply with the instructions given in the manual makes the warranty directly become null and void.
The Company also disclaims any liability for damages caused by lift improper use and/or due to changes made without the manufac-
turer's authorisation.
21