The Freeport Systems - Sennheiser Freporre Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

freeport_514013_0808_Sp5.book Seite 3 Freitag, 29. August 2008 12:08 12

The freePORT systems

Designed for different areas of application, the freePORT systems are
available in three variants.
Presentation Set:
This system is ideal for presentation applications. The unobtrusive
ME 2 clip-on microphone is virtually invisible.
Instrument Set:
This system is for connecting musical instruments (e.g. guitar) which
have a ¼" (6.3 mm) jack socket directly to the bodypack transmitter.
Vocal Set:
This system is ideal for vocal and speech applications.
Transmitters and receivers of the freePORT systems have four factory-
preset frequencies for direct channel selection – ready for immediate
use after switch-on.
The freePORT systems are available in three UHF frequency ranges:
Frequency range A:
Frequency range B:
Frequency range C:
Frequency range E:
Notes:
Use of A, B and C frequency ranges must be licensed. Most EU
countries do not require licensing for use of frequency range E.
Frequency range B (691 to 693 MHz) is intended for use solely in
the USA and Canada.
Please be legal and observe the country-specific regulations of the
licensing authorities. Sennheiser are not responsible if you operate
illegally.
To avoid interfering with other users, the transmitter should be
switched off when not in use.
Features of the freePORT systems:
Up to four transmission links per frequency range which can be
operated simultaneously
Reliable transmission technology
Diversity technology for minimizing dropouts in the reception
Adjustable squelch for eliminating RF interference
Rugged housings
Crystal-clear reception due to dynamic processor
719 to 721 MHz
691 to 693 MHz
742.5 to 744.5 MHz
863 to 865 MHz
3

Publicidad

Tabla de contenido
loading

Tabla de contenido