Baby auto Orrua 23 Manual De Uso página 13

2. SEAT PARTS AND FITTINGS
1. Cover.
2. Belt height adjuster.
3. INSTALLING CHILD SEAT. GROUP 2 AND 3.
WARNING
1. Place the child seat on the seat of the vehicle, (3.1).
2. Place the child in the child car safety seat (3.2).
3. Fasten seat belt, making sure the lap belt passes under both
armrests and that the diagonal shoulder belt passes under the
armrest closest to the anchorage point. Check that the belt is
not twisted, place the height adjuster so that the belt is tight and
guide the belt over the child's shoulder into the correct position
(3.3).
4. Insert the vehicle safety belt in the vehicle anchor point. You will
hear a "click" when properly installed (3.4).
IMPORTANT
Always check that the seat belt is firm and unwrinkled, but that it
does not cause the child discomfort. To release your child, unbuckle
the safety belt as described in the instructions.
Group 2/3 Grupo 2/3
Use Group 2 and 3 only from approx.
4 to 12 years of age (15-36 kg).
www.babyauto.com www.babyauto.com
EN
13 13