Olivetti FAX LAB 710 Manual Del Usuario página 75

CE
DECLARACIÓN
MANUFACTURER'S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A.
Declara bajo su responsabilidad que:
Declares under its sole responsibility that:
el producto descrito en esta guía
the product described in this guide
RESPONDE a la Directiva 1999/5/CE del 9 de marzo de 1999
is IN COMPLIANCE with directive 99/5/EC dated 9
y cumple con los requisitos esenciales de Compatibilidad Electromagnética y de Seguridad previstos por las
Directivas:
fulfills the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
2004/108/CE del 15 de diciembre de 2004;
th
2004/108/EC dated 15 December 2004;
2006/95/CE del 27 de diciembre de 2006;
th
2006/95/EC dated 27 December 2006;
puesto que está diseñado y fabricado de conformidad con las siguientes Normas Armonizadas:
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information
Technology Equipment) / Class B;
EN 61000-3-2/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 2: Limits - Section 2: Limits for
harmonic current emissions (equipment input current ≤ 16 A per phase);
EN 61000-3-3/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of
voltage fluctuations and flicker in low voltage supply systems for equipment with rated current up to and
including 16A);
EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity
characteristics - Limits and methods of measurement);
EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).
Además, responde a las siguientes normas:
Moreover the product is in compliance with following Standards:
ETSI TBR 38: May 1998 (Requirements for a terminal equipment incorporating an analogue handset function
capable of supporting the justified case service when connected to the analogue interface of the PSTN in
Europe);
ETSI ES 203 021: January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for
Terminals for connection to analogue interfaces of the Telephone Networks.
La conformidad con los mencionados requisitos esenciales se certifica mediante la colocación de la Marca CE en el
producto.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Scarmagno, 11 de julio de 2007
th
Scarmagno, 11 July 2007
Notas: 1) La Marca CE se colocó en 2007.
Notes: 1) CE Marking has been affixed in 2007.
2) El Sistema de Calidad responde a las normas de la serie UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea, Via Jervis, 77 - Cap. Soc. Euro 154.000.000 - C.C.I.A.A. Torino n. 547040 - Trib. Ivrea Reg. Soc. n.1927 - Cod. Fisc. e Part. IVA 02298700010
DE CONFORMIDAD del FABRICANTE, de acuerdo con la norma ISO/IEC 17050
Via Jervis, 77 - IVREA (TO) - ITALY
th
march 1999
Olivetti S.p.A.