Releasing Drain Hose; Removing Shipping Hardware; Installing Hole Plugs - Electrolux EFLS210TIS Instrucciones De Instalación

Releasing Drain Hose

Removing shipping hardware

Installing hole plugs

Locate hole plugs in the small bag supplied with washer
instruction guides. Cut them apart from each other and
insert them in the holes in washer back panel.
Installation Instructions
x 2
x 3
x 3
The drain hose is secured in place with two plastic
latching clamps. Press the locking tab and release the
drain hose.
Remove all of the following from the back of the washer:
• 3 shipping bolts
• 2 plastic clamps
• 3 shipping spacers
NOTE
Rubber expansion material on spacers may need time to
relax before they can be easily pulled through shipping hole.
IMPORTANT
Save all shipping bolts and spacers for future use. If the washer is
to be transported at a later date, the shipping hardware must be
reinstalled to help prevent shipping damage.
7