Installation Instructions; Removing Foam Packaging - Electrolux EFLS210TIS Instrucciones De Instalación

6

Installation Instructions

Removing foam packaging

WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after the washer is
unpacked. Children might use them for play. Cartons covered
with rugs, bedspreads, or plastic sheets can become airtight
chambers causing suffocation. Place all materials in a
garbage container or make materials inaccessible to children.
1 Remove door tape and empty drum contents, including
foam shipping brace inside rubber gasket of door.
2 Using a foam corner post from the packaging to protect
the floor, carefully lay the washer on its back.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one person
move or lift the washer.
3 Remove styrofoam base and set it aside.
4 Carefully return the washer to an upright position.
5 Carefully move the washer to within 4 feet (1 m) of its final
location.
IMPORTANT
Save styrofoam base and shipping braces for use to help
prevent washer damage during any future moves.
x 2