Amica 10143.4TdDpHaQaXSp Manual De Instrucciones página 49

OPERATION
3.Setting cook time
Press the button until
MENU
Time) is flashing (it is only possible when the
function selector knob
other than "0").
"00:00" will be displayed instead of current
time. Set cooking time using the control knob
. Time will be set if setting is not changed
within 5 seconds and the menu button is not
pressed .
MENU
Cook time countdown begins and
is on.
An acoustic signal is sounded after the set
time has elapsed (4 beeps - a pause - 4
beeps).
The sequence of acoustic signals is repeated
for approximately one minute in three second
intervals. "00:00" is displayed and the
symbol (cook time) is flashing.
To deactivate the alarm press any button
or turn oven function selector knob to "0"
or operate the control knob. Once alarm is
deactivated, current time and the selected
function are displayed, the
time) is off.
4.Setting cook time and end time (delay
mode)
When the symbol (Cook Time) is shown,
press the button repeatedly until the
MENU
symbol (End Time) flashes. Current time
is displayed. Set End Time using the control
knob.
symbol (Cook
is set to a position
symbol
symbol (cook
49
End Time will be set if setting is not changed
within 5 seconds and the menu button
is not pressed. End Time
played.
When then delay time has elapsed, the
electronic programmer switches to
(Cook Time). Cook Time countdown begins,
symbol (End Time) is off and
(Cook Time) is on.
An acoustic signal is sounded after the set
time has elapsed (4 beeps - a pause - 4
beeps). The sequence of acoustic signals
is repeated for approximately one minute in
three second intervals. "00:00" is displayed
and the symbol (cook time) is flashing.
To deactivate the alarm press any button
or turn oven function selector knob to "0"
or operate the control knob. Once alarm is
deactivated, current time and the selected
function are displayed, the
time) is off.
In order to erase Cook Time, End Time or
Kitchen Timer settings, press and hold
buttons for approximately 3
MENU
CLEAN
seconds and all settings will be erased.
Erasing the settings is only possible
when one of the electronic programmer's
settings (Cook Time, End Time, Kitchen
Timer) was previously set.
MENU
symbol is dis-
mode
symbol
symbol (cook