Eco Function - Amica 10143.4TdDpHaQaXSp Manual De Instrucciones

OPERATION
5.2 Displaying and changing temperature
setting
Default temperature setting for a programme
is displayed after selecting
tion. This is indicated by the flashing °C on the
display. Use the control knob
the temperature setting (in 5°C increments).
New temperature will be set if setting is not
changed within 5 seconds or
pressed or °C button is pressed
Temperature can be changed during a pro-
gramme when °C button is pressed
Current temperature is displayed as a percen-
tage of the initially set temperature:
25% 50%
If the function selector knob it is set to „0"
and current temperature exceeds 60°C,
the thermometer symbol is on to warn the
user that the oven is still hot; when current
temperature is below 60°C, the thermometer
symbol is off.
. oven func-
to change
button is
MENU
.
C
.
C
100%
75%

5.3 ECO function

ECO function saves energy by making use of
residual heat. When a ECO function is activa-
ted, electronic programmer switches off the
appliance before reaching the End Time.
ECO function can be activated for the follo-
wing oven functions:
To activate the eco-function set
Time) or (Cook Time) and
Electronic programmer will switch off the ap-
pliance at a time determined by the formula
"End Time minus Residual Heat Time".
Activate ECO function.
After selecting any oven function compatible
with the ECO function, set
or (Cook Time) and
press the . button. The
ECO
displayed confirming that the ECO function
has been activated.
To deactivate the ECO function press
button or operate oven function selector knob.
When the ECO function is not activated
symbol is off.
An acoustic signal is sounded (4 beeps - a
pause - 4 beeps) after the initially set time has
elapsed. The sequence of acoustic signals
is repeated for approximately one minute in
three second intervals. "00:00" is displayed
and the symbol is flashing.
53
(Cook
(End Time).
(Cook Time)
(End Time). Then
symbol will be
ECO