Adding Additional Valve Positions - Aventics VS CL03 Instrucciones De Servicio

AVENTICS | CL03/CL03-XL | R402000141–BDL–001–AE
1
7
5
4
6
3
Fig. 13: Inserting a valve
8.2

Adding additional valve positions

To expand the valve system by one or more valve positions,
either with valves or with blanking plates, follow the steps
described here.
– Make sure that the system is not under voltage or
pressure.
– The maximum number of 16 (CL03) or 18 (CL03-XL) valve
positions must not be exceeded.
With 17 valve positions, at least one subbase with dual
signal must be used and with 18 valve positions, two
subbases with dual signal must be used. The maximum
number of subbases with dual signal is two per VT.
Conversion and Extension
2
89