Settings; Set Clock; Adjusting Language; Display - Dal Zotto TECLA Manual Del Usuario

SETTINGS

SET CLOCK

ADJUSTING LANGUAGE

Š see chapter: commissioning settings

DISPLAY

The "DISPLAY" menu contains two sub-menus:
Š KEY LOCK
Š BRIGHTNESS.
KEY LOCK
The menu allows the user to lock the display keys (like with mobile phones).
CONTROLS PROCEDURE
Š Press key 6.
Š Proceed by pressing key 2 until settings is displayed.
Š Con rm using key 6.
Š Press key 2 until DISPLAY is shown.
Š Con rm using key 6.
Š Key lock will appear - con rm with key 6.
Š Use keys 4-5 to enable ON/ disable OFF.
Š Press key 1 several times to con rm and exit the menu.
USING THE KEY LOCK AFTER ACTIVATION:
TO LOCK THE KEYBOARD, PRESS KEYS 1 AND 5 AT THE SAME TIME UNTIL THE FOLLOWING APPEARS: "KEYS
LOCKED"
TO UNLOCK THE KEYBOARD, PRESS KEYS 1 AND 5 AT THE SAME TIME UNTIL THE FOLLOWING APPEARS: "KEYS
UNLOCKED"
BRIGHTNESS
This menu allows the user to adjust the brightness of the display. The possible settings range from OFF - 10 to 31.
Activating OFF, the back light of the display will go o after a preset delay.
The back light will go on as soon as a key is pressed or if an alarm should be triggered in the machine.
CONTROLS PROCEDURE
Š Press key 6.
Š Proceed by pressing key 2 until settings is displayed.
Š Con rm using key 6.
Š Press key 2 until display is shown and use key 6 to con rm.
Š Press key 2 until brightness appears and con rm with key 6.
Š Use keys 4-5 to set the brightness.
Š Press key 1 several times to con rm and exit the menu.

STAND BY

STAND BY WITH DIGITAL THERMOSTAT STANDARD
STBY FUNCTION SET AT ON
If the STBY function is active (ON), when the stove reaches the room temperature and exceeds the set value plus DELTA T OFF, it will switch o
after a default delay time, displaying STAND BY.
When the room temperature is below the setting less DELTA T OFF, it will start to work again at the set power displaying work.
ENGLISH
2 1
OFF
3
2 1
OFF
3
6 4
5
6 4
5
49