Settings For First Use; Date Time; Language; Degrees - Dal Zotto Leyla Elite Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SETTINGS FOR FIRST USE

After connecting the power cord at the back of the stove, turn the switch located at the back to position (I).
The switch at the back of the stove is used to power the generator board.
The stove will remain o and the word OFF will appear on the panel.

DATE TIME

This menu allows you to set the time and date.
CONTROLS PROCEDURE
Š Press 6.
Š Press 3 until SETTINGS appears and con rm by pressing 6.
Š Con rm DATE TIME by pressing 6 and using 4 and 5 to set the day.
Š Keep pressing 6.
Š Use keys 4 or 5 to set and 6 to move forward, to set the day, time, minutes, date, month, year.
Š Press 6 to con rm or 1 to return to the previous menus to the initial state.

LANGUAGE

This menu allows you to set the preferred language.
The available languages are: Italian - English - German - French - Spanish - Portuguese.
CONTROLS PROCEDURE
Š Press 6.
Š Press 3 until SETTINGS appears and con rm by pressing 6.
Š Press 3 until LANGUAGE appears and con rm by pressing 6.
Š Select the language using keys 4 or 5.
Š Press 6 to con rm or 1 to return to the previous menus to the initial state.

DEGREES

This menu allows you to set the unit of measurement for the temperature. The preset value is °C.
CONTROLS PROCEDURE
Š Press 6.
Š Press 3 until SETTINGS appears and con rm by pressing 6.
Š Press 3 until DEGREES appears and con rm by pressing 6.
Š Use keys 4 -5 to select Celsius or Fahrenheit.
Š Press 6 to con rm or 1 to return to the previous menus to the initial state.
NO IGNITION
THE FIRST IGNITION MAY FAIL, SINCE THE AUGER IS EMPTY AND IT IS NOT ALWAYS POSSIBLE TO FILL THE BURN
POT WITH THE RIGHT AMOUNT OF PELLETS TO START THE FLAME REGULARLY. IF THE PROBLEM OCCURS ONLY
AFTER A FEW MONTHS OF OPERATION, MAKE SURE THAT THE ROUTINE CLEANING OPERATIONS INDICATED ON
THE STOVE BOOKLET HAVE BEEN CARRIED OUT PROPERLY
52
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido