Stihl SR 430 Manual De Instrucciones página 64

English
2 2
Squeeze the tabs (2) together and
N
pull the lever (3) outwards.
4
Remove the solution container from
N
the metering unit's housing (4) and
turn it to position B (dusting and
spreading mode).
62
4
Thoroughly clean the plastic pins
N
and the sealing face on the solution
container – check that there is no
residue.
Thoroughly clean the holes and
N
sealing face on the metering unit (4)
– check that there is no residue.
Fit the solution tank on the metering
N
unit's housing (4).
5
Hook the lever (3) over the bar (5)
N
on the solution container.
3
6
6
2 2
Press the levers (3) down until the
N
tabs (2) snap into their seats (6) on
the housing with a loud click.
Check that the container is firmly
N
seated.
Blower tube
1
Insert a screwdriver into the tab (1)
N
of the hose clamp (2) on the control
handle.
Turn the screwdriver clockwise to
N
loosen the hose clamp (2).
Pull the hose (3) off the stub.
N
SR 430, SR 450
3
6
2
3