Filling The Container - Stihl SR 430 Manual De Instrucciones

6
5
Rotate the nozzle (4) until the
N
lugs (5) are covered.
Pull the nozzle (4) off the blower
N
tube (6).
Converting back to misblowing mode
The conversion is carried out in the
reverse sequence.
Fitting the hose
Push the hose with clamp (2) over
N
the stub on the control handle.
Use pliers to squeeze the hose
N
clamp together (2) until the retaining
strip engages and locks.
SR 430, SR 450

Filling the Container

4
1
The gasket (1) in the cap must be in
N
good condition, lubricated with
grease and clean.
Stand the machine on a level
N
surface.
Mistblowing
2
Close valve lever (1) for solution
N
feed.
Pour thoroughly mixed spray
N
solution into the container through
the strainer.
Do not exceed maximum fluid level of 14
liters (arrow).
1
Fit the cap and tighten it down
N
firmly.
English
63