After Finishing Work - Stihl SR 430 Manual De Instrucciones

Dual deflector screen
Splits the spray jet in two directions.
Allows two closely planted rows to
–
be treated simultaneously.
SR 430, SR 450

After Finishing Work

Emptying the solution container
Close the valve lever.
N
Shut off the engine – see "Starting /
N
Stopping the Engine".
1
Turn the metering knob (1) to
N
position "E" and collect the
remaining solution in a suitable
container.
Cleaning the solution container
Rinse and clean the solution
N
container and hose system with
clear water.
Dispose of remaining spray solution
N
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions.
Allow the machine to dry with the
N
cap removed.
If strainer is dirty:
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
Pull the strainer (1) upward and out
N
of the solution container.
2
Clean the strainer (2) with clear
N
water and a brush.
After dusting and spreading – SR 450
only
Run the unit until the solution
N
container is completely empty
Close the metering lever.
N
Shut off the engine – see "Starting /
N
Stopping the Engine".
Rinse and clean the solution
N
container with clear water.
English
65