Specifications; Installation - JUKI LZ-271 Manual De Instrucciones

SPECIFICATIONS

Model
Sewing type
Application
Sewing speed
Zigzag width of throw
Needle
Lubricating system
Zigzag width adjustment
Attachment
Distance from machine
arm to needle
Size of bed
Lubricating oil
Noise

1. INSTALLATION

6
1
Fig. 1
7
LZ-271
1-needle, lockstitch embroidering machine
For embroidery on light-, medium- and heavy-weight materials
Max. 2,000 sti/min (Zigzag width, max: 10 mm for zigzag stitch)
Max. 1,700 sti/min (Zigzag width, max: 12 mm for embroidery)
0 mm to 12 mm
SCHMETZ 1738 Nm65 to Nm110 (standard Nm75)
Centralized oiling system (manual oiling by an oiler)
Adjustable by knock-up type knee-lifter
Attachment for compass cord embroidery can be installed
270 mm (from the needle entry to the base of machine arm)
178mm x 477mm
JUKI New Defrix Oil No.1
- Equivalent continuous emission sound pressure level (L
A-weighted value of 82.0 dB; (Includes K
GR2 at 2,000 sti/min.
- Sound power level (L );
WA
A-weighted value of 86.5 dB; (Includes K
GR2 at 2,000 sti/min.
6
6
5
5
4
4
3
2
27mm
1.5mm
Fig. 2
) at the workstation:
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 3744
WA
1) When carrying the sewing machine, be sure to carry
by two people.
(Caution) Do not hold the handwheel.
2) Do not put protruding articles such as the screw-
driver and the like at the location where the sewing
machine is placed.
3) Attaching the hinge seat, support rubbers and re-
lated parts of the machine head
Fix hinge seat 1 , machine head cushion seat 2 ,
machine head support rubber seat 3 , machine head
support rubber 4 and machine head cushion 5 sup-
plied with the machine on the table using nails 6 .
4) Installing the oil receiver
Install oil receiver 7 on the table with the nail sup-
plied with the unit.
–  –