Tunturi FitRun 50i Manual Del Usuario página 21

!
CAUTION
• Before folding the equipment, make sure
that the incline is 0. If the incline is not 0,
folding will damage the mechanism.
Console (fig. E-1)
!
CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is
covered with drops of sweat.
• Do not lean on the console.
• Only touch the display with the tip of your
finger. Make sure that your nails or sharp
objects do not touch the display.
NOTE
• The console switches to standby mode
when the equipment is not used for 4
minutes.
Buttons
STOP
- Press once, stop workout/ treadmill gently.
- Press twice, stop workout/ treadmill more
rapidly.
- Press and hold for two seconds in idle mode to
reset console settings/ clear ERR message.
SPEED Up
- Increases the speed (1.0 - 16 Kph).
- Pressing once increases the speed 0,1 kph.
- Pressing and holding for two seconds will
increase the speed faster.
- Scroll programs and change values in
programming mode.
SPEED Down
- Decreases the speed (1.0 - 16 Kph).
- Pressing once decreases the speed 0,1 kph.
- Pressing and holding for two seconds will
decrease the speed faster.
- Scroll programs and change values in
programming mode.
INCLINE up
- Increases the incline (0~10 ±1).
INCLINE down
- Decreases the incline (0~10 ±1)
MODE
- Press to select program target mode when
treadmill is in programming mode:
Cycle the FAT parameters when being in FAT
programming mode.
PROGRAM
- Press to Cycle through the possible
programmes.
( P0/ P1~P36/ U01~U03/ FAT )
START/ PAUSE
- Start selected workout, or restart pause workout
when being in pause mode.
- Pause active workout.
Speed hot keys:
Speed Hot Keys are set as 3, 6, 12, 16.
For example, the speed changes from any speed
to 8 km/h by pressing the Speed Hot Key 8.
Incline hot keys.
Incline Hot Keys are set as 6, 9 &12.
For example, the incline level changes from any
level to 6% by pressing the Incline Hot Key 6.
Handle bar speed quick-access keys:
- + Same as Speed +.
- – Same as Speed –.
Handle bar incline quick-access keys:
- + : Same as Incline +.
- - : Same as Incline –.
Explanation of display items (Fig.
H)
Speed
- Shows the actual treadmill speed in workout
mode.
- Shows target speed in programming mode.
- Shows program selection when being in
program mode.
- 400 meter dots-track shows the imaginary
position as if you would be running on a 400
mtr. running track.
English
21