3M Littmann 3200 Guia De Inicio Rapido página 8

9. Custom Confi guration
The Model 3200 has several operational settings that can be changed using its confi guration menu system. Within this menu
system, the (+) and (-) buttons are used for scrolling and the (M) button is used for selecting options. The Filter button acts as
an escape key, used for returning to the previous menu or to the operating mode of the stethoscope.
To access the Main menu: Depress and release the (M) button. The Main menu will be displayed (NOTE: Only 3 options will
be visible at a time. All options can be viewed in sequence upon scrolling with either the (+) or (-) buttons):
To enter the Setup Menu: Use the (-) button to scroll down the list of Special Functions until SETUP is highlighted. Select the
SETUP option by pressing and releasing the (M) button. This will display the following menu:
8
To select the power setting: Select the POWER option in the SETUP menu. Use the (-) and (+) buttons to scroll through the
list of power settings. Press and release the (M) button to select a setting.
The power settings provide different degrees of power consumption. In general, the longer the stethoscope remains in
an active mode, the greater its power consumption. The factory default is the MEDIUM level. (NOTE: The Auto Off power
management feature is further described below).
To select the battery type: Select the BATTERY option in the Setup menu. Use the (-) and (+) buttons to scroll through the
list of battery types. The LITHIUM battery is a non-rechargeable cell especially recommended for low-temperature operation
of the stethoscope. The NIMH battery is rechargeable (external charger required). Press and release the (M) button to select a
setting. The factory default is the ALKALINE battery.
SETUP
POWER
BATTERY
set vol
+
nimh
alkaline
lithium
–
9