Option Menu; Important - JVC LT-40HG60U Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
OPERATION
Note:
Auto volume: only available when the input signal
volume is too large or distortion.
Surround sound can be set on or off.
AD switch is audiodescription functionality.
SPDIF mode is the digital output sound feature.
4.TIME MENU
The fourth item of the menu is the TIME MENU. You
can adjust the clock, power on/off time, sleep time
etc Press
to move, press OK to adjust.
Clock --
Off Time
On Time
Sleep Timer
<
TIME
Auto Standby on
Time Zone
NOTE:
1. When auto standby is on, if without signal and
without action for 3 hours, TV automatically turns
to standby mode, if with signal but without action
for 4 hours, TV automatically turns to standby mode.
When auto standby is off, TV will always be on.
2.In DTV mode, the current time depends on the
broadcast station. Hence, to avoid the confusion of
EPG and PVR settings, the clock function cannot
be set manually.

5.OPTION MENU

The fifth item of the MENU is the OPTION MENU. You
can adjust the Menu language, Audio language,
Subtitle language etc.
OSD Language English
Audio Languages English
Subtitle Languages English
Country France
PVR File System
<
Restore Factory Default
OPTION
Home / Shop Mode
HDMI CEC Off
HDMI ARC Off
PVR Setup
Personal Video Recording (PVR) settings (In DTV
Mode only)
The PVR function allows this unit to record live digital TV
(DTV)
programmes,
allowing for viewing on demand at
any time. This function supports DTV
recording, Time shift and playback as described below.
PVR will only record when there is an external USB drive
connected to the unit with sufficient memory space
available. Recording can be done both manually on
demand and also using Scheduled Recording.

IMPORTANT!

All USB media must be formatted in FAT32 file system or
Hi Speed FS. If media, including portable HDD, are
formatted in NTFS,
no recording can be done on this
media.
All USB media must comply with USB 2.0
specifications. Maximum USB media size that can be
accepted is up to 1 terabyte (1TB)
WARNING:
Ensure that no valuable information is currently stored on
the disk, as the formatting process means that ALL DATA
will be ERASED from the memory drive connected to the
USB port.
--
--
--
>
>
programme
Check & Format Media
1. Insert MEDIA into the USB connection on the rear
panel of the TV.
2. Press MENU button on the front panel to display the
main menu.
3. Press ◄/► buttons to select the OPTION menu, then
press OK buttons for the submenu.
4. Press ▲/▼ buttons to select PVR File System and
press OK to enter.
OSD Language English
Audio Language
Subtitle Language
Country France
<
OPTION
PVR File System
Restore Factory Default
Home / Shop Mode Shop Mode
HDMI CEC Off
HDMI ARC Off
NOTE: NOT all USB devices, such as phones, MP3
players, cameras, and the like, are compatible with
recording files.
5. On the remote control press ▼ button to
Check
PVR File System and press OK to start check.
Select Disk
Check PVR File System
USB Disk
Format
Time Shift Size
Speed
HD support
Free Record Limit
OK
NOTE:If a compatible USB drive is attached,
'SUCCESS' will be displayed & no further action is
required. Press MENU repeatedly to EXIT.
6. If the USB device is found to be incompatible with
your television, an additional screen will be
displayed informing you that you must format your
device.
Use the ◄/► to select file system. Choose the file
system type:"FAT32" is best for High Speed USB
storage
devices.
"High Speed FS" is best for Low Speed USB storage
devices.
Select Disk
Check PVR File System
USB Disk
Format
Time Shift Size
Speed
Free Record Limit
OK
Français
Français
>
select
C:
SUCCESS
Pass
Pass
All
2218 KB/s
5 Hr.
MENU
C:
FAIL
No USB Disk
6 Hr.
MENU
EN
19

Publicidad

Tabla de contenido
loading

Tabla de contenido