Alarm Recording; Connecting An Alarm Sensor; Setting The Alarm Speed And Duration - Sony SVT-S480ES Manual De Instrucciones

Alarm Recording

You can use a door switch or alarm sensor to trigger
alarm recording. You can make alarm recording in
recording mode, stop mode power off mode and one-
shot recording mode with the selected recording speed.

Connecting an Alarm Sensor

Commercially available
switching box, etc.
Setting the Alarm Speed and
Duration
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "3" of the MAIN
MENU flashes on the monitor screen.
to ALARM OUT
to COM
to ALARM
to COM
IN
2-5 6
3
Press MENU B.
The ALARM SET menu appears.
ALARM SET
ALARM MODE
ALARM SPEED
ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
1SHOT REC
REC FIELD
INTERVAL
< >
NEXT PUSH
+ –
SELECT : DATA SET : / RETURN : MENU
4
Press MENU V to move the flashing to the setting
of ALARM SPEED and set it by pressing MENU +
or –.
ALARM SET
ALARM MODE
ALARM SPEED
ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
1SHOT REC
REC FIELD
INTERVAL
< >
NEXT PUSH
+ –
SELECT : DATA SET : / RETURN : MENU
When TAPE in the GENERAL SET menu is set
to T-120:
You can set to SP 2H (for recording in 2-hour
mode in SP recording mode), EP 6H (for recording
in 6-hour mode in EP recording mode), SP 12H,
EP 18H, SP 24H, EP 30H and NC (for recording at
the same speed as before the alarm was received).
When TAPE in the GENERAL SET menu is set
to T-160:
You can set to SP 2H (for recording in 2-hour
mode in SP recording mode), EP 8H (for recording
in 8-hour mode in EP recording mode), SP 16H,
EP 24H, SP 32H, EP 40H and NC (for recording at
the same speed as before the alarm was received).
A1
SP 2H
20s
OFF
COUNTER
ON
OFF
01
1 min
A1
SP 2H
20s
OFF
COUNTER
ON
OFF
01
1 min
35