Searching For The Time And Date - Time/Date Search; Selecting The Searching Interval - Sony SVT-S480ES Manual De Instrucciones

Searching for the Time and Date — Time/Date
Search

Selecting the Searching Interval

1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The GENERAL SET menu appears.
GENERAL SET
REC MODE SP
TAPE T–120
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
PB S–VHS AUTO
BAUD RATE 1 9 2 0 0
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
4
Press MENU V to move the flashing to the setting
of T/D SEARCH and set to CONVENTION or
NEW by pressing MENU + or –.
GENERAL SET
REC MODE SP
TAPE T–120
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH NEW
PB S–VHS AUTO
BAUD RATE 1 9 2 0 0
<NEXT PUSH >
+ –
SELECT : DATA SET : / RETURN : MENU
CONVENTION: to search every an hour
NEW: to search every 10 minutes
5
Press SEARCH/AUDIO ON to return to the
normal display.
46
2-4 5
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.