JVC KD-LH3150 Manual De Instrucciones página 42

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To select the font on the display
—Font Type
You can change the font types used on the
display. Select either "1" or "2" according to your
preference.
To turn the tag display on or off—Tag
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). If both ID3v1 and
ID3v2 are recorded on a disc, ID3v2 information
will be shown.
• On:
Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, folder name and file name
appear.
Note:
If you change the setting from
"Off" to "On" while playing an MP3
file, the tag display will be activated
when the next file starts playing.
• Off:
Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be shown.)
To change the FM tuner selectivity
—IF Filter
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard.
• Auto:
When this type of interference
occurs, this unit automatically
increases the tuner selectivity so
that interference noise will be
reduced. (But the stereo effect will
also be lost.)
• Wide:
Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
42
To turn on/off the key-touch tone—Beep
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
• On:
Activates the key-touch tone.
• Off:
Deactivates the key-touch tone.
To select the external component to use
—Ext Input
(Only for KD-LH3100)
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
• Changer: To use the CD changer.
• Line In:
To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
To turn the trim illumination on or off
—TrimIllum
You can illuminate the trim plate according to
your preference.
• On:
Illuminate the trim plate.
• Audio:
Illumination changes as audio signal
level changes.
• Off:
Cancels the illumination.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-lh3100

Tabla de contenido