dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 20

COMPACT 1.4
EN
11 Once these operations are complete, dismount
the console, turning the nuts (A) until the EPDM
seal is compressed between 3 and 5 mm
approximately, then turn the nuts at the base of
the Compact (B) and the upper nuts of support
C. Diagram A.
Important: In order to prevent possible filtrations
!
of water, ensure the seal is tight with the base of
the Compact - Torque 1.3 a 1.8 kg. As indicated
in Diagram A.
Turn nuts "A" to tighten the seal between 3 and 5
mm and then tighten nuts "B" and "C".
12 Mount the console again using the original
screws.
11
Diagram A
3÷5 mm.
hatch profile
aluminium support
12
20
Air conditioning for vehicles
Seal
Base
B
C
A
Front
12