Mounting Guidelines - dirna Bergstrom bycool FLAT CONCEPT Instrucciones De Montaje

CONCEPT
EN
Mounting
Guidelines
• Prior to assembly, read the instructions and follow these
throughout the mounting operations.
• Use the appropiate tools for each operation.
• References to position:
- Right - Driver's right hand.
- Left - Driver's left hand.
Electricity
• Switch the connector off.
• Disconnect the battery before starting mounting
operations.
• Verify that the electrical components have been
connected correctly.
Driving torques (N.m)
Steel Quality
Filet
8.8
M4/60 2.9
M5/80 5.5
M6/100 10
!
When installing the evaporative unit in the ceiling, protect
the upper part of the cabin with a cloth or sheet to prevent
scratching. When installing Bycool Flat Concept in the
ceiling, bear in mind that cabins are normally fitted with a
hatch and have a structure which can withstand the weight
of the unit. However, if this is not so and it is necessary
to open up the ceiling, or should the hatch material not
be sufficiently resistant (e.g. fibre, plastic, etc) the installer
must decide, under his sole responsibility, on the need
to reinforce the ceiling in order to prevent deformation,
breakage, incoming water, etc, and use the means
necessary to this end.
Wrench
10.9
4.2
7.5
13
Warning
Torx wrenches set
Allen wrenches set
Open-jawed spanner 10
Open-jawed spanner 13
Open-jawed spanner 14
Scissors
Flexo-meter
Documentation included
Mounting instructions
User's guide
Troubleshooting
Warranty
Fragile
Beware of cuts!
7
Electrical hazard
8
10
!
Piece 15 of the listing of provided pieces must be
replaced every 12 months.
!
Dirna Bergstrom, s.l. shall not be responsible for
breakdowns or damages coming from an inadequate
handling or installation of the equipment or from mo-
difications and substitutions carried out without our
express and written authorisation.
!
Véase procedimiento de garantía del producto in-
cluido en Diagnosis de Averías.
!
Please see product warranty procedure included in
Troubleshooting.
12
Air conditioning for vehicles
Tools
220.A10.0001
220.AA7.0003
220.AA7.0004
220.AA1.0010
Symbology
!
Warnings