Replacing The Compression Ring - Dentsply Sirona Midwest Stylus Plus Manual Del Operador

8 Maintenance
C
60
8.2.2

Replacing the compression ring

In order to guarantee proper functioning of the "anti-retraction valve
in the spray water duct", we recommend replacing the compression
ring (C) every six months.
1. Purge the spray water duct at the maximum water flow.
2.
Slide the tool, with the new compression ring attached, to just
in front of the corresponding groove (C).
3. Insert the compression ring. Do not use any sharp objects.
4. Check that the ring fits snugly all the way around and is not
twisted.
Operating instructions Midwest Stylus Plus / Midwest Tradition
67 27 148 D3673.201.09.01.02