Safe Operation Guide; Features And Specification; Features - Baxtran CHS Serie Manual De Usuario

1. SafE opEraTIon gUIdE

1. Do not overload this chS load guage.
2. Do not perform overhead weighing. Stay clear when chS load guage is in operation
3. Do not perform weighing under strong wind condition which may cause incorrect reading
4. Do not perform weighing under enviorment of temperature rapid changes in which may cause incorrect reading
5. Do not attempt to open this chS load guage, no user serviceable parts inside.
6. Do not remove wire rope stopper from hook. for safety reasons, always apply it.
7. Remove all loads from shackle or hook when not in used.
8. before weighing, check and make sure that all hanging /load- receiving elements / devices are in good condition.
9. check hook, shackle, safety pins, and latches periodically. contact your dealer for parts replacement in case defect, deform or wearing is
found.
10. Always lift loads vertically.

2. fEaTUrES and SpECIfICaTIon

PROFILE
ERT wireless chS load guage is an extremely well-built instrument for industry use ,as a standard wireless tool offer universal
applications,Whether used as conventional crane weigher or to measure force, ERT wireless
precision accuracy, calibration is easier with wireless indicator.

2.1 FEATURES

Rugged construction.
▪
▪ Accuracy: 0.1% of capacity
▪ All fuctions and units are clearly display on the LcD (with backlighting),
▪ Digits are 1 inch high for easy distant viewing.
▪ Two user programmable Set-Point can be used for safety and warning applications or for limit weighing.
Long battery life on 3 standard "LR6(AA)"size alkaline batteries.
▪
▪ All commonly used internationally recognized units are available:kilograms(kg), short Tons(t) pounds(lb), Newton and kilonewton(kN)
▪ Infrared Remote control easier to calibration(with password)
Infrared Remote control with many fuctions: "ZERO", "TARE","cLEAR","PEAK","AccUMULATE","hOLD","Unit change","Voltage check"
▪
and "Power Off"
▪ 4 local mechanical keys: "ON/Off","ZERO","PEAK" and "Unit change".
▪ low battery warnning.
Rf wireless palm indicator
▪
2.1 features
2.2 main teChniCal Data
2.3 speCifiCation
2.4 appearanCe illustration
2.5 power supply
USER MANUAL CHS
chS load guage is microprocessor controlled for
En
37