Battery Voltage; Unit Convert; Return To N Ormal Tecting Status - Baxtran CHS Serie Manual De Usuario

5.9 BATTERY VOLTAGE

Display
U .
* * *
NOTE Battery voltage normally between U 3.50 to U 4.70 if below U 3.10 display will flash, Battery should be changed.

5.10 UNIT CONVERT

DISPLAY
Un =00
5.11 RETURN TO NORMAL TESTING STATUS
DISPLAY
ESC
DesCription
Press MODE key 3 times, display"dC", press ENTER key.
Display current battery voltage
Press MODE key again
Return
DESCRIPTION
Press MODE key select "UnIt",
press ENTER key,Unit
will be changed circulate
Press MODE key again
Return
DESCRIPTION
Press MODE key select "Esc"
press ENTER key
Return to normal testing status
Press MODE key again
Return
USER MANUAL CHS En
43