Calibration - Baxtran CHS Serie Manual De Usuario

Press ENTER Key to confirm
Press ZERO to set value, Press
to move digit
Press ENTER Key to confirm
Press ENTER Key to confirm
Press MODE Key

6.3 CALIBRATION

operation
To confirm
Press MODE key 8 times
Press ENTER Key
Press ENTER Key
Press ENTER Key
Press ENTER Key
Press MODE Key to storage
Press TARE Key to shift digit
46
02000
TARE
02000
g=
9.82
End
Display
0
CLlbr
CAL 1
CALSP
loAd
01000
--------
-oL-
End
1000.0
1000
New chS, the screen display 02000, if
screen display calibrated value
Set "2 LO " or "2 HI
acceleration of gravity
New chS, the screen display 9.7930, if
display calibrated area value.user can change it to local value, press
MODE key to shift digit, Press
ted value is 9.783-9.832
confirm above parameter setting, Exit parameter setting program.
illustration
Take cap:1000kg chS as example , pay attention that the screen
display " 0 " after hanging tare weight, you can hang tare weight at
first, then turn on.
Access calibration Status
One point calibration
Zero point calibration
hanging standard weight 2000kg
Waiting until STB signal on screen
Display capacity you choose when parameter setting, and first digit
flash, Do wait until "STB" signal display on screen.
confirm
calibration end.
USER MANUAL CHS
chS calibrated, the
" Value.
chS be calibrated, the screen
ENTER key to change value. The limi-
En