Power Supply; Display; Lcd Display; Key - Baxtran CHS Serie Manual De Usuario

2.5 POWER SUPPLY

Battery: "LR6(AA)"size alkaline batteries. 1.5Vx3
current: the chS load guage average current is about Dc 35mA, 3pcs new batteries can be used for about 40hours. Wireless indicator average
current is about DC 28mA, 4pcs new batteries can be used for about 80hours.
Low battery warning: When the digits flashes, it means the battery needs to be replaced. The chS load guage or wireless indicator will power
off automatically after half hours operation

3. dISpLaY

3.1 ÉCRAN LCD
DISPLAY LCD
25mm (1'')
5 digits LcD
with all fuctions and units

3.2 KEY

2.1 lCD Display

2.2 Key
Wireless signal, It appear means signal stable, it disppear while signal
miss. It flash means signal weak
Battery Voltage
PEAK current value is Peak hold value(maxmium value)
Appear one time when Parameter or calibration value storage. Long time
MEM
appearance means current value is Accumulation data
STB Stable Status
kN "kilonewton",N "Newton".Tare status"N"will flash
t "ton"
lb "pound"
kg "kilogram"
ON/OFF
Power ON & Power OFF
Press "
▪
▪ In ON status, Press "
turn Off
ZERO
When the indicator is no load on the hook, little figures show on
▪
the display, press this key and the reading will be zero.
UNITS
▪ Press UNIT key, the unit on LcD will circlely sequence
change:
▪ kg, t, lb, klb, N, kN, kg.
PEAK
▪ When weight is changing, press this key will display the maximum
reading.
▪ Press this key again, reading will resume changing.
full
ON/OFF"Key 3 Seconds, the chS load guage turn ON.
ON/OFF"Key 1 Second, the chS load guage
.
USER MANUAL CHS
empty
low
En
39