HEM-7070-E_i-C10_main.book 40 ページ 2011年11月4日 金曜日 午前10時20分
5. Handling Errors and Problems
5. Handling Errors and Problems
5.1
Error Messages
Error Display
Cuff is under inflated.
Movement during
measurement.
Cuff over inflated.
Batteries have run down.
Blinks or appears
continuously.
Movement, sound.
Cuff leaks air.
40
Cause
Carefully read and repeat the steps
listed under Chapter 3.3.
Replace all four "AA" batteries with
new ones.
Refer to Chapter 2.1.
Carefully read and repeat the steps
listed under Chapter 3.3.
Replace with a new cuff.
Remedy