Faber GALILEO SMART Manual Del Usuario página 13

Timer (generic)
Hotplate function
to keep food
warm
Turbo function
Quick heating
function
Countdown with alarm for generic use.
To activate: with the hob turned on and with no pans present,
press the Digits in the Timer controls area one at a time, setting
the values individually by selecting them on the power bar
(Minimum 1 minute - Maximum 99 minutes).
The Display in the Timer management controls area shows the
countdown, if it has been set. Otherwise it displays " C L " as
standard.
To deactivate: set the timer values to zero or press
the hob turned off.
To activate: select one of the 4 cooking areas and press
The Digit for the selected area will show
To deactivate: press
Both the cooking areas and the Hood can be set to extra power.
To activate: both for the hood and for the cooking areas, press " 9
" on the power bar 2 times. The corresponding Digit displays
To deactivate: select one of the other possible values on the
power bar.
Select one of the 4 cooking areas and press and hold for 3
seconds on the selected value (from 1 to 8) on the power bar.
The hob will peak at maximum power for 15 seconds before
returning to the set power for a given time, after which it will
switch off (See table below).
The Display shows " A " plus the selected value.
1 -> 40 seconds
2 -> 72 seconds
3 -> 120 seconds
4 -> 176 seconds
5 -> 256 seconds
6 -> 432 seconds
7 -> 120 seconds
8 -> 192 seconds
9 -> not available
P -> not available
or press .
twice with
.
.
13