Setting The Time And Date - Microlife BP 3AA1-2 Manual De Instrucciones

4.4. Setting the time and date

This blood pressure monitor incorporates an integrated clock with date display. Time and date are recorded
along with pressure and pulse. After new batteries have been inserted, the clock begins to run from the follow-
ing setting: 2000-01-01 00:00 O'clock. You must then re-enter the date and current time. Please proceed as fol-
lows (Example: Entering 2002-06-15 Time 09:30 AM):
1. Press the User/Time button for at least 3 sec-
onds. The display now indicates the set year, The
last two characters are blinking.
2. The correct year can be entered by pressing the
MEMORY button. Once for each change.
(Example: 1 x press)
3. Press the User/Time button again. The display
now switches to the current date, during which the
first character (month) blinks. Note: Holding the
button down speeds up the procedure.
4. The current month can now be entered by
pressing the MEMORY button. Example: pressing
5 x advances 5 months)
6
5. Press the User/Time button again. The last two
characters (day) are now blinking.
6. The current day can now be entered by pressing
the MEMORY button. (Example: 14 x presses
advances the day from the 1st to 15th)
7. Press the User/Time button again. The display
now switches to the current time, during which the
first character (Hour) blinks.
8. The corresponding hour can now be entered
by pressing the MEMORY button.
(Example: 9 x presses)
TIME
TIME