Personnel Qualifications; General Safety Instructions - Aventics CMS Instrucciones De Servicio

AVENTICS | CMS, BDC, Stand-Alone | R412008961–BDL–001–AF

2.4 Personnel qualifications

Assembly, disassembly, commissioning, and operation
require basic electrical and pneumatic knowledge, as
well as knowledge of the appropriate technical terms.
Assembly, disassembly, commissioning, and operation
may therefore only be carried out by qualified electrical
or pneumatic personnel or an instructed person under
the direction and supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures
due to their professional training, knowledge, and
experience, as well as their understanding of the relevant
conditions pertaining to the work to be done. Qualified
personnel must observe the rules relevant to the subject
area.

2.5 General safety instructions

W
Observe the regulations for accident prevention and
environmental protection.
W
Observe the safety instructions and regulations of the
country in which the product is used or operated.
W
Only use AVENTICS products that are in perfect
working order.
W
Follow all the instructions on the product.
W
Persons who assemble, operate, disassemble, or
maintain AVENTICS products must not consume any
alcohol, drugs, or pharmaceuticals that may affect
their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only
use accessories and spare parts approved by the
manufacturer.
W
Comply with the technical data and ambient
conditions listed in the product documentation.
W
If unsuitable products are installed or used in safety-
relevant applications, this may result in unintended
system operating states that may lead to injuries
and/or equipment damage. Therefore, only use a
product in safety-relevant applications if such use is
specifically stated and permitted in the product
documentation.
57
For your safety