S&P EMI-PROGRAM Serie Manual De Instrucciones página 21

.- Remember that as a general rule, a comfort temperature in an area used
during the daytime should range between 21 and 23ºC. When the weekly
program changes to ECO (Economic) mode, the temperature will be lowered by
3ºC to the comfort temperature, while in Frost protection mode the temperature
will automatically be set at +7ºC.
EXAMPLE Program
Here is an example of a program for a heater used in a sitting room (an area
used during the daytime). A comfort temperature of 21ºC is chosen for this room.
Monday to Friday (1-2-3-4-5 of the month)
Saturday and Sunday (6-7 of the month)
Note: When the
the programmed temperature, so the heater is warming up.
Note: The screen will always display the temperature you have selected.
6.- ADDITIONAL Settings and functions
6.1 Blocking the keypad:
The user can make sure that no one changes the program by blocking the
keypad. This is a very useful function for public buildings/hotels, etc. It can also
be used to prevent children tampering with the settings. You can block the
keypad by pressing and holding the "+" and "– "buttons. You can unblock the
controls in the same way.
When the radiator keypad is blocked, the following icon will flash on the screen.
12:00 AM – 1:00 AM Comfort mode (21ºC)
1:00 AM – 5:00 AM Frost protection mode (7ºC)
5:00 AM – 6:00 AM Economy mode (18ºC)/21ºC-3/
6:00 AM – 8:00 AM Comfort mode (21ºC)
8:00 AM – 5:00 PM Economy mode (18ºC)
5:00 PM – 12:00 AM Comfort mode (21ºC)
12:00 AM – 1:00 AM Comfort mode (21ºC)
1:00 AM – 5:00 AM Frost protection mode (7ºC)
5:00 AM – 7:00 AM Economy mode (18ºC)/21ºC-3/
7:00 AM – 12:00 AM Comfort mode (21ºC)
symbol appears, this means that the temperature is below
21