5.1
INACTIVE mode:
When this icon
button on the keypad to start using the heater.
5.2
COMFORT mode:
m/Ok
Press the
button until the corresponding icon appears (Sun). Adjust your
'comfort' temperature as desired using the "+" and "– "keys. As a general rule, a
comfort temperature in an area used during the daytime should range between
21 and 23ºC.
5.3
ECO (Economy) mode:
m/Ok
Press the
button until the corresponding icon appears (Moon). This setting
is for areas used at night. When you choose this setting, the temperature will
lower by 3ºC from the programmed comfort temperature.
5.4
FROST PROTECTION mode:
Press and hold the
appears (Snowflake). This will automatically program an ambient temperature of
+7ºC.
This setting is very useful to avoid the temperature dropping below 7ºC indoors
while you are away from home for prolonged periods (weekends).
Note: When the
the programmed temperature, so the heater is warming up.
Note: The screen will always display the temperature you have selected.
5.5
PROGRAM mode:
Set the heater to program mode, which will allow you to program in different
temperatures depending on the time of day and day of the week. Set up a
program according to your needs, which will allow you to save energy and stay
comfortable.
is shown on screen, the heater is in Inactive. Press the
m/Ok
button for 3 seconds until the corresponding icon
symbol appears, this means that the temperature is below
Pro
19