S&P EMI-PROGRAM Serie Manual De Instrucciones página 20

.- In order to activate program mode, the appliance should be in INACTIVE,
which means that only the icon should appear on screen. If this is not the
case, press the button on the control panel until you are in the right mode.
.- Next, press and hold the button for 5 seconds, until the PROGRAM (Pro)
mode appears on screen.
.- Description of the PROGRAM mode screen:
.- Press the "+" key to select the required mode (Comfort/ECO/Frost protection)
m/Ok
for a specific time. Use the button to confirm and move to the next hour.
.- Press the "–" button to move through the available times without changing the
program. Press and hold the button to skip through the hours without changing
the temperature.
.- When you have programmed in the different settings for an entire 24 hour day,
you can automatically jump to the next day.
(1 Monday... 2 Tuesday... 7 Sunday).
.- Once you have finished the program on day 7 (Sunday), the system will
automatically save the program and you will be able to adjust the time and day of
the week.
.- Use the "+" and "–" buttons to choose the day of the week. Confirm by
m/ok
pressing the button. Repeat the process to set the time.
.- Once you have finished the weekly program, select Program (Pro) mode by
pressing the m/ok button and the heater will start running the chosen program.
.- The screen will change to show the programmed temperature and the chosen
setting (Pro).
20