Power Supply; 3- Protecting The Environment And Saving Energy; Installing Your Wine Cabinet - Eurocave 6000 Serie Modo De Empleo

3 - P
Disposal of packaging
All packaging used by EuroCave Professional is made
from recyclable materials.
After unpacking your cabinet, take the packaging to
a refuse collection point. For the most part, it will be
recycled.
Recycling: a caring gesture
Electrical and electronic equipment can have a harmful effect on the
environment and human health owing to the presence of hazardous
substances.
You should never therefore trash electronic and electrical equipment with
unsorted municipal waste.
When purchasing a new EuroCave Professional product, you can entrust
recycling of your old appliance to your EuroCave Professional retailer.
Unpacking
When your cabinet is delivered, check the outside for signs of damage
•
(impact, warping...).
Open the door and check that the various elements inside are intact
•
(walls, Main du Sommelier supports, hinges, bottle support...).
Remove the protective elements found inside and outside your cabinet
•
including the lower hinge protector (see diagram (1))
Fit the cap (see diagram 2), found in the accessories bag, used for sealing
•
N6000-0815-7L-V9.indd 7
The wine cabinet's power lead has a plug, to be plugged into a standard earthed outlet to prevent The wine cabinet's power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock. any risk of electric shock.
Have the power supply socket checked by a qualified electrician who will check that it is Have the power supply socket checked by a qualified electrician who will check that it is
correctly earthed and will carry out, if necessary, work to ensure that the socket correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards. complies with current standards.
Contact your usual EuroCave Professional retailer to change the power lead if it is damaged. It
must be replaced by a EuroCave Professional original manufacturer's part.
If you are moving to a foreign country, check that the supply characteristics of the cabinet
If you are moving to a foreign country, check that the supply characteristics of the cabinet
correspond to the country (voltage, frequency).
correspond to the country (voltage, frequency).
ROTECTING THE ENVIRONMENT AND SAVING
4 - I
NSTALLING YOUR WINE CABINET
1
2
2 - P
OWER SUPPLY
Speak to your EuroCave Professional retailer. He will explain the removal
and collection arrangements set up in the EuroCave Professional network.
In compliance with legislation relating to protecting and caring for the
environment, your wine cabinet does not contain C.F.C.s or H.C.F.Cs.
To save energy
•Install your wine cabinet in a suitable location (see following page) and
observe the recommended temperature ranges.
• Keep the door open for as short a time as possible.
•Ensure that the door seal is in good working order and that it is not
damaged. If it is, contact your EuroCave Professional retailer.
Disable any unusable appliances by unplugging them and cutting off the
power lead.
the hole in the lower hinge.
Precautions
Do not place your cabinet in an area liable to flood.
•
Do not place your cabinet close to a source of heat or expose it to
•
direct sunlight
Prevent water from splashing on any parts of the rear of the machine.
•
Arrange the power lead so that it is accessible and does not come into
•
contact with any of the appliance's components.
Tilt the cabinet slightly backwards in order to adjust the front feet (by
•
screwing or unscrewing them) so that you can level your cabinet (spirit
level recommended).
ENERGY
18/09/15 11:48
7
GB