Setup Method - Denon CDR-W1500 Instrucciones De Operación

ENGLISH
Names and Functions of Remote Control Unit Buttons
Buttons not explained here function in the same way as the corresponding buttons on the main unit.
2
Buttons marked " " function regardless of the function selector switch.
2
High speed dubbing
mode button (DUBBING
HIGH)
Normal speed dubbing
mode button (DUBBING
NORMAL)
Number buttons (1 to 10)
Use these buttons for direct
search and programmed playback.
Record button ( REC)
4
Automatic search reverse
and forward buttons (
8
and )
9
Play button ( PLAY)
1
Stop button ( STOP)
2
Program/direct button
(PROG/DIRECT)
Press this button to switch
between the program setting
mode and the direct sea ch mode.
Normally this is set to the direct
search mode.
Call button (CALL)
Use this button to check the
programmed tracks.
Random button (RANDOM)
Press this button to play the track
in random order.
(See Page 22.)
Display select button
(DISPLAY SEL.)
Fader button (FADER)
Press this for fade-in and fade-out
recording.
10
Relay mode button
(RELAY MODE)
Clear button (CLEAR)
Function selector
switch
+ 10 button
Switches the operation of
Use this button to enter track
the buttons between the
numbers of 11 or over for direct
CD and CD-R.
search and programmed playback.
Manual search reverse and
forward buttons (
)
7
Menu button (MENU)
CD CD R
DUBB NG RELAY
NORMAL HIGH MODE
Enter button (ENTER)
A ! " A ! " D # % D # % G & ' G & '
1 2 3
Pause button (
,
J J （ ） M M ＊ ＋ P P −
4 5 6
. : ;
S S ／ V V Y Y ＜ ＞
Repeat A - B button (A - B)
7 8 9
Press this to perform A-B repeat
[ = ] [ = ] { ? } CLEAR CLEAR
playback.
10 + 10
REC
6 7
Repeat 1/ALL button (1/ALL)
MENU
Press this to perform 1-track
8 ENTER 9
repeat playback and all-track
repeat playback.
PLAY
STOP PAUSE
2 3
PROG/DIRECT CALL 1 / ALL A B
Character button
(CHARACTER)
RANDOM TIME TITLE CHARACTER
DISPLAY SEL FADER INPUT F NALIZE
Finalize button (FINALIZE)
B
REMOTE CONTROL UNIT RC 278
Title button (TITLE)
Press this button to switch the
time display to the title display.
Input select button (INPUT)
Time button (TIME)
Inserting Disc
2
q Press the OPEN/CLOSE button (
w Insert a disc in the appropriate recess in the tray, label side
up.
e Press the OPEN/CLOSE button (
• "Close" lights up, followed by "TOC
and the display will show the type of disc you inserted.
• If you insert a blank or partly-recorded CD-R or
unfinalized CD-RW, the CD recorder will calibrate the
disc for optimum recording. During this process the
display will first show "Now
number of audio tracks. Calibration can take up to 60
seconds. (CD-R/RW)
• If a CD-R/RW is finalized it will show "CD" on the
display.
NOTES:
• If your finger should get caught in the disc tray when it closes, press the OPEN/CLOSE button (
• Only Audio CDs will be accepted. If a non-audio disc is inserted, the display shows "Use Audio CD".
and
6
• For recording it is important that the blank disc is completely free from dust particles or scratches. See "Disc cleaning"
on Page 6.
• When text information is entered but not finalized, the disc holder will not open until all of the text information has been
deleted.
"Text Erase OK?" will be displayed for 2 seconds. When the enter button is pressed during this interval, the text
information will be deleted and the disc holder can be opened.
PAUSE)
3
9

SETUP METHOD

The 9 items listed below can be set with the setup menu. The following messages will be displayed for the various setting
items.
• Close the disc trays and set the stop mode for both the CD and CD-R sections.
• The contents of the set menu are stored, but this data might be lost if the unit is disconnected from the power source for 2 to 3
days.
q "Sync. Rec?"................................................... Synchro recording mode.
w "Sync. Level?" ............................................. Synchro recording level.
e "A.T. Mark?"................................................... Auto track mark.
r "FadeIn Time?" ............................................. Fade-in recording time.
t "FadeOutTime?" .......................................... Fade-out recording time.
y "Intro Time?"................................................ Scan recording intro time.
u "Custom Index" ............................................. Custom index.
i "Skip Play?"................................................... Skip play.
o "Timer Play?"................................................ Timer playback.
) to open the disc tray.
5
) to close the tray.
5
Reading"
OPC" and then the
Disc tray
Recess
OPEN/CLOSE button
( )
5
).
5