Denon CDR-W1500 Instrucciones De Operación página 25

1. Relay play
With the relay play mode it is possible to play the disc in the CD side and the one in the CD-R side, relaying between them.
The programmed play and random play modes can be preset for the discs in the CD and CD-R units.
1
(Main unit)
CDR-W1500
PCM AUD O ECHNOLOGY COMPACT D SC RECO DER
DUBB NG D SPL Y T TLE /
8 9 NORMAL H GH TIME SE ECT CHAR CTER
REM TE S NSOR
POW R PHONES PHONES LEVEL
PL Y STOP PAUSE RELAY MODE OPEN / CLOSE N FF
-
1 2 3 5
M N M X
4 2 1
1
Load the discs you want to play in the CD and CD-R units.
Press the RELAY MODE button and select "Relay Play".
2
• The "RELAY" indicator lights.
Use the CD or CD-R section repeat 1/ALL button on the remote control unit to turn the repeat mode on or off.
• The 1-track repeat mode cannot be set in the relay mode.
• The relay operation is performed as shown below according to the combination of the relay and repeat modes:
Repeat mode
3
Repeat on: "REPEAT"
indicator lit
Repeat off CD side playback
Relay play starts when the CD unit's play button is pressed.
• The sound is output from the CD/CD-R output jacks.
4
• To quit the relay mode, press the relay mode button and select "Single Play".
• The disc in the side that is not operating can be replaced during relay playback.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
Select the CD side.
(Remote control unit)
DUBBING RELAY
1 NORMAL H GH MODE
A ! " A ! " D # % D # %
1 2
J J （ ） M M ＊ ＋
4 5
S S . ／ V V : ;
7 8
[ = ] [ = ] { { ? }
10 + 10
TIME CLEAR NPUT INAL ZE 4 REC 8 9
REC
MULT JOG
OPEN CLOSE MENU PLAY STOP PAUSE
+
6
MENU
5 1 2 3
PU H
E TER
8 ENTER
STOP PLAY
2
PROG DIRECT CALL 1 / ALL
1 3
RANDOM TIME TITLE
DI PLAY S L FADER NPUT
Relay operation
1 CD side playback 1 CD-R side playback
1 CD-R side playback 1 Stop
2. Mix mode
In the mix mode, programmed play and random play of the disc in the CD unit and the one in the CD-R unit can be performed as
if the two discs were a single disc.
(1) Mix programmed playback
CD CD-R
1
2
G & ' G & '
3
(Main unit)
,
P P −
6
Y Y ＜ ＞
PCM AUDIO TECHNOLOGY / COMPACT D SC RECO DER CDR W1500
9
CLEAR CLEAR
DUBB NG DISP AY TI LE /
8 9 NORMAL HIGH T ME SELECT CHARACTER
PLAY STOP PAU E RELAY MODE OPEN / CLOSE
7 1 2 3 5
9
PAUSE
3 4
A - B 5 2 1
CHARACTER
F NAL ZE
1
Load the discs you want to play in the CD and CD-R units.
Press the RELAY MODE button and select "Mix Play".
2
• The "MIX" indicator lights.
Press the CD or CD-R unit's PROG/DIRECT button on the remote control unit to set the program mode.
3
• The "PROG" indicator lights.
Follow the procedure at "Programmed playback" on Page 21 to program the tracks in the order in which you want to
play them.
4
• You can program tracks for both the CD and CD-R units by using the CD/CD-R selector switch on the remote control
unit to switch between them.
• Up to 30 tracks can be programmed.
Mix programmed playback starts when the CD or CD-R unit's play button is pressed.
5
• The sound is output from the CD/CD-R output jacks.
• To quit the mix mode, press the relay mode button and select "Single Play".
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
1
T ME CLEAR NPUT FIN LI E 4 REC 8 9
R MOTE EN OR
POWER PHONES PHONES LEV L MUL I JOG
ON
OFF OPEN /CLOSE MENU PL Y STOP PAUSE
- +
5 1 2 3
MI AX
P SH
ENT R
1 5
ENGLISH
(Remote control unit)
4
CD CD R
DUBBING RELAY
NORMAL HIGH MODE 2
A ! " A ! " D # % D # % G & ' G & '
1 2 3
J J （ ） M M ＊ ＋ P P , −
4
4 5 6
. : ;
S S ／ V V Y Y ＜ ＞
7 8 9
[ = ] [ = ] { { ? } CLEAR CLEAR
10 + 10
REC
6 7
MENU
8 ENTER 9
PLAY
STOP PAUSE
5
2 3
PROG/DIRECT CALL 1 / ALL A - B
3
RANDOM TIME T TLE CHARACTER
D SPL Y SEL FADER NPUT FINALIZE
B
REMOTE CONTROL UN T RC-278
25