Denon CDR-W1500 Instrucciones De Operación página 31

Input the title.
• Either turn the jog dial on the main unit or use the automatic search buttons (
unit to select the desired character.
• Some characters that can be input on the CDR-W1500 cannot be displayed on other models.
• The shape of the cursor changes each time the CHARACTER button is pressed.
[Explanation of cursor:]
......... Capital letter/number input mode
7
.........Small letter/number input mode
[Available characters and numbers]
Capital letter/number input mode:
ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
Small letter/number input mode:
abcdefghijklmnopqrstuvwxyz0123456789
Special character input mode:
SPACE
• When the manual search forward button (
7
unit is set to the input standby mode for the next character.
• The cursor can be moved back by pressing the manual search reverse button (
characters.
8
Press the MENU button to enter the input title.
• To erase a character, move the cursor to that character then press the CLEAR button.
• To correct a character, first erase it, then input the correct character.
Turn the jog dial to input numbers or special characters not on the number keys or the
+10 key.
[Example:]
To input "%" using the number
Button
keys on the remote control unit,
press button 2 twice in the
special character input mode. 1
2
3
4
5
6
7
8
9
10
+10
and ) on the remote control
8 9
......... Special character input mode
) or the ENTER button is pressed, the selected character is set, and the
). Use this to correct input
6
Capital letter Small letter Special character
input mode input mode input mode
ABC abc
DEF def
GHI ghi
JKL jkl
MNO mno
PQR pqr
STU stu
VWX vwx
YZ yz
– –
– –
(2) Adding track titles
8
(Main unit)
CD W1500
PCM UD O TECHNOLOGY COMP CT D SC RECORDER
DUBB NG DISP AY TI E /
8 9 NORMAL HIGH T ME S LECT CHAR CTER
P AY S OP PAUSE RELAY MODE OPEN / CLOSE
1 2 3 5
1
Switch on the power.
2
Load the CD-R/RW disc to which the track name will be affixed.
Press the MENU button, turn the jog dial of the main unit or press the automatic search button of the remote control,
3
and select the TEXT edit mode.
• "Text Edit?" is displayed.
Press the enter button, turn the jog dial of the main unit or press the automatic search button of the remote control to
4
display "Text In?".
Now, press the enter button, turn the jog dial of the main unit or press the automatic search button of the remote
5
control to display "Track Title?".
Press the enter button again, turn the jog dial of the main unit or press the automatic search button of the remote
6
control, and select the track to which you would like to affix a track name.
• "**Tr Title?" is displayed.
Press the ENTER button.
7
• The cursor flashes, indicating the title input standby mode.
! "
# %
Input the title.
8
& '
• For instructions on inputting titles, see step 7 under "(1) Adding disc titles" on Page 31.
( )
* +
9
Press the MENU button to enter the input track title.
, –
. /
: ;
NOTES:
< >
• Text editing is not possible with commercial audio CDs or with finalized CD-R/RW discs.
[ = ]
• A maximum of 23 characters can be stored per item.
{ ? }
Approximately 900 characters can be input per disc.
• Entered text information is not written to the disc until the disc is finalized.
• Even when the power source is disconnected, the text information is stored for 2 to 3 days after being entered when the
disc has not been finalized. This text information might be lost if the unit is disconnected from the power source for a
long time.
2
4,5,6,7,8
TIME CLEAR NPUT FINA IZE 4 REC 8 9
RE OTE S NS R
POWER PHONES PHONES LEVEL MULT JOG
ON OFF OPEN CLOSE MENU PLAY STOP PAUSE
- +
5 1 2 3
I AX
PU H
NTER
3,4,
1 3,4,5, 2 3,9
5,6,8
6,7,8
ENGLISH
(Remote control unit)
CD CD R
DUBBING RELAY
NORMAL HIGH MODE
A ! " A ! " D # % D # % G & ' G & '
1 2 3
,
J J （ ） M M ＊ ＋ P P −
4 5 6
S S . ／ V V : ; Y Y ＜ ＞
7 8 9
[ = ] [ = ] { { ? } CLEAR CLEAR
10 + 10
8
REC
6 7
MENU 3,9
8 ENTER 9
STOP PLAY PAUSE
2 3
PROG/DIRECT CALL
1 / ALL A - B
8
RANDOM TIME TITLE CHARACTER
DI PLAY S L FADER NPUT F NAL ZE
B
REMOTE CONTROL UNIT RC 278
31