Relay Mode - Denon CDR-W1500 Instrucciones De Operación

ENGLISH
8. Timer playback
• A separately sold audio timer can be used to start playback or recording at a specific time.
• Also refer to the operating instructions for the audio timer and amplifier.
• The program and relay modes can also be used.
(1) Connections
Audio timer
(2) Timer playback
(Main unit)
CDR-W1500
PCM AUD O TECHNOLOGY COMPACT D SC RECORD R
DUBB NG DISPL Y IT E /
8 9 NORMAL H GH T ME SE ECT CH RACTER
REM TE S NS R
POWER PHONES
P AY S OP PAUSE

RELAY MODE

OPEN / CLOSE N OFF
5
1 2 3
5
1
Turn on the power of the CDR-W1500 and the connected components.
Perform the procedure at "Setup Method (10) Timer play mode setting" (Page 13) and make the timer playback on
2
setting.
3
Load the Disc for timer playback into the CDR-W1500.
4
Set the amplifier's input selector to "CD".
Press the play button ( PLAY).
1
5
• Play the disc to check the volume.
Set the audio timer for the desired time.
• The power of the components connected to the audio timer turns off.
6
• When the set time is reached, the power of the various components turns on automatically and playback begins from
track one.
• The settings for the program mode, random mode, relay mode, etc., are stored in the memory before the power is turned
off.
• If there is no disc in the CD side and a disc is loaded in the CD-R side:
Timer playback does not function when the relay mode is set to normal or dual.
Timer playback functions for the CD-R side when the relay mode is set to relay or mix.
24
CDR-W1500 (this set)
DR W 5 0
4
1 2 3 5 5 1 2 3
Amplifier
AC 120 V/60 Hz power outlet
(Remote control unit)
Select the deck to be operated.
NORMAL
TIME CLEAR NPUT FINA IZE 4 REC 8 9
PHONES LEVEL MULT JOG
OPEN CLOSE MENU PLAY STOP PAUSE
- +
5 1 2 3
M N M X
PU H
NTER
STOP
PROG/DIRECT CALL
5
RANDOM
14 RELAY MODE
Relay mode
Various types of playback and recording can be performed through relay operation between the set's CD and CD-R units.
There are three relay modes.
The set mode is stored in the memory, but the data may be cleared if the power is not turned on for 2 or 3 days.
• The mode switches as shown below each time the RELAY MODE button is pressed.
ª
• The disc in the CD unit and the one in the CD-R
Relay mode:
unit are played one after the other.
• Programmed play and random play of the disc in
ª
the CD unit and the one in the CD-R unit can be
Mix mode:
performed as if the two discs were a single disc.
ª
• The CD and CD-R units can be operated
Dual mode:
independently.
ª
Normal mode: • Either the CD or the CD-R unit can be operated.
NOTE:
• Recording, finalizing and editing are not possible in the relay or mix mode.
CD CD R
DUBBING RELAY
HIGH MODE
A ! " A ! " D # % D # % G & ' G & '
1 2 3
＊ ,
J J （ ） M M ＋ P P −
4 5 6
S S . ／ V V : ; Y Y ＜ ＞
7 8 9
[ = ] [ = ] { { ? }
CLEAR CLEAR
10 + 10
REC
6 7
MENU
8 ENTER 9
PLAY
PAUSE
2 3 1
1 / ALL A - B
TIME TITLE CHARACTER
"Relay Play"
"Mix Play"
"Dual Play"
"Single Play"