How To Use - STARFRIT 024604 Instrucciones De Uso

HOW TO USE

READ THE INSTRUCTIONS BEFORE USE
NOTE: During first use of the appliance, smoke or light vapors may occur from the
appliance because of the initial warming process of the materials. This is normal and
will quickly disappear.
NOTE: Always use plastic, rubber, wooden, or silicone cooking utensils inside the
cooking pot to avoid scratching the cookware.
NOTE: Do not operate the appliance directly under kitchen cabinets. Provide
adequate space above and around the appliance for air circulation.
NOTE: Before each operating, ensure the sealing ring and pressure release valve are
properly installed. Ensure the lid is tightly closed before operating.
NOTE: Always check, pressure release valve, anti-blocking nut, float valve for clogging
before use.
1. Place the appliance on a flat, stable, heat resistant surface.
2. Open the lid, take out the inner cooking pot and add all ingredients inside the
pot. Refer to Fig. 2.
NOTE: Ensure the minimum quantity of food and liquid is at least 1/5 full. Do not
fill the appliance over 4/5 full. Refer to markings inside the cooking pot. Do not
fill the appliance over 3/5 full when cooking food that expands such as grains and
dried vegetables. Refer to Fig. 6.
Fig. 6 How to fill the pot
3. Place the inner cooking pot inside the appliance. Refer to Fig. 2.
4. Close the lid securely until the base and the lid are properly aligned.
Refer to Fig. 5.
NOTE: The appliance is equipped with locking lid mechanism that will prevent the
pressure from building into the appliance if the lid is not securely locked.
NOTE: Ensure the sealing ring is properly installed before operating. Do not
operate the sealing ring is damaged. Refer to Fig. 4.
5. Position the pressure release valve to the ''sealed position''. Refer to Fig. 3.
6. Plug the power cord into a 120V AC wall outlet. Appliance will beep and display
will show 00:00.
7. Select the desired cooking function. Light indicator will blink (standby mode) and
display will show pressure cooking time. Press start button, a rolling bar will appear
indicating that the heating process has started.
NOTE: Refer to the following section for more details on each cooking functions.
Use the ''TIME'' function during the standby mode to adjust cooking time (refer to
''TIME'' section).
8. Refer to the ''Cooking Progress Display'' section to help you monitor every
cooking stage.
12