STARFRIT 024604 Instrucciones De Uso página 9

FIG. 4 HOW TO REMOVE/INSTALL THE SEALING RING AND VENT
COMPONENTS
The sealing ring is located under the lid. Using the grip pin, pull the sealing ring plate
out from the cover. Remove the sealing ring from the sealing ring plate by section.
With the sealing ring plate detached from the cover, you have access to the vent filter
and vent pipe (located under the vent filter). Next, remove the vent filter for cleaning.
NOTE: Although you will not need to remove the filter after every use, you should
periodically remove it for cleaning. With the sealing ring plate on the counter, use a
table knife on the rim of the filter vent and insert the tip into one of the filter slots; lift
the filter up. When the vent filter is clean, place back the vent filter by using the clips to
secure it.
NOTE: Ensure the sealing ring and the vent filter are properly reinstalled back on the
clips and into the sealing ring plate before operating the appliance. Never operate the
appliance with a damaged sealing ring.
FIG. 5 HOW TO CLOSE THE LID
Place the lid on the appliance and align the symbol with the ''open'' mark on the body
and turn clockwise to align with the ''close'' mark. Close the lid securely until a "click"
is heard. The appliance is equipped with a locking lid mechanism that prevents the
appliance from operating if lid is not properly locked.
9