Operation - BABYTREND Sit N’ Stand Snap Fit Manual De Instrucciones

SAFETY
8) • The shoulder straps of the 5-point
harness have 3 attachment positions.
Select the position that places the
shoulder strap level with, or below the
top of the child's shoulder (Fig. 8a).
To adjust harness height unhook the
shoulder strap from the crotch buckle.
Feed the shoulder strap through the
harness spread slots. You can access
these slots from the rear of the seat
underneath the fabric. Feed shoulder
strap through the appropriate slot
and reattach the shoulder strap to
the crotch buckle.
• Carefully place the child in the stroller
seat and bring the safety harness
around the child's waist and over the
child's shoulders. Place the crotch strap
between the child's legs. Insert the male
end of each shoulder/waist belt into the
buckle on the crotch strap. Tighten the
harness so it is snug around the child's
waist and over the child's shoulders
(Fig. 8b).
TO RELEASE THE CHILD
9) • To release, push the button on center
clasp and the two harness buckles will
pop free (Fig. 9).
9
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 8a
Adjust for a snug fit
Fig. 8b
Center Clasp
Fig. 9
SIT N' STAND ®
WARNING:
The rear
platform and jump seat are
designed to accommodate
a child who is at least 2 1/2
years old, has good balance
and coordination, and is not
over 40 inches tall.
10) • Sitting: Always use the 3-point harness
while in the seated position facing the
stroller handle. Put the seat belt around
the child's waist and buckle to the crotch
strap (Fig. 10). Adjust the seat belt to be
snug around the child's waist.
• Standing: Your child can stand on
the riding platform facing forward or
backwards.
NOTE: Use caution while standing on the
platform. Make sure your child is always
holding onto the frame while riding.
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

OPERATION

Fig. 10
10