Operation - BABYTREND SS88 Manual De Instrucciones

SAFETY
• Carefully place the child in the stroller
seat and bring the safety harness around
the child's waist and over the child's
shoulders. Place the crotch strap between
the child's legs. Insert the male end of
each shoulder/waist belt into the buckle on
the crotch strap. Tighten the harness so it
is snug around the child's waist and over
the child's shoulders (Fig. 8b).
TO RELEASE THE CHILD
9) • To release, push the button on center
clasp and the two harness buckles will
pop free (Fig. 9).
9
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Adjust for a snug fit
Fig. 8b
Center Clasp
Fig. 9
SIT N' STAND
®
WARNING:
The rear
platform and jump seat are
designed to accommodate
a child who is at least 2 1/2
years old, has good balance
and coordination, and is not
over 40 inches tall.
10) • Attach the Joy Ride Platform: Pull the
locks back on the platform and attach it
to the rear tube of the frame (Fig. 10a).
When the platform is not in use, remove
platform or rotate it upwards and secure
it to the basket with the snap.
NOTE: Make sure the platform locks
onto the frame before use.
• Jump Seat: Always use the 3-point
harness while in the seated position
facing the stroller handle. Put the seat
belt around the child's waist and buckle
to the crotch strap (Fig. 10b). Adjust the
seat belt to be snug around the child's
waist.
• Standing: Your child can stand on
the riding platform facing forwards or
backwards.
NOTE: Use caution while standing on
the platform. Make sure your child is
always holding onto the frame while
riding.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

OPERATION

Fig. 10a
Fig. 10b
10