Operation; Connection To Vehicle; Switch On; Switch Off - Bosch KTS 670 Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
5.

Operation

5.1

Connection to vehicle

The KTS 670 is set up for operation with a voltage sup-
ply of 12 V and 24 V.
!
Make sure that the diagnostic cable on the KTS 670
is plugged in correctly. If incorrectly plugged in, the
pins on the male connector may be broken off.
9
1
1 0
2
1 1
3
1 2
4
1 3
5
1 4
6
1 5
7
1 6
8
Fig. 4:
Connection schematic KTS 670
When suspending the KTS ��� on the
steering wheel, there is a risk of injury due
to activation of the airbag.
!
When placing the KTS 670 in the engine compart-
ment, there is a risk of short-circuit for the vehicle
battery due to the metallic housing base.
Robert Bosch GmbH
5.2

Switch on

Switch on the KTS 670 with the  button.
"
The KTS 670 remains in the start screen
Software Selection" after system start. The start
screen will always be displayed after switching on.
The displayed applications can be selected in the start
screen. Touch the application, with which you want to
work, with the stylus. If a PS/2 keyboard is connected,
select the desired application with the arrow key ou.
Start the application with E.
i
The application "
available, if the DVD "ESI[tronic]" is in the external
DVD drive and this is connected to the KTS 670. This
application is needed for the software update, see
also Chapter 4.6 "Software Update Installation".
5.�

Switch off

There are several ways of switching the KTS 670 off:
1.
By pressing the
shut down.
2.
By pressing the
ned and you can shut down the KTS 670 with Exit.
3.
You can also select "
Software Selection. All the active applications will be
closed and the KTS 670 switches itself off.
!
If the KTS 670 can no longer be operated due to a
computer fault, you can switch off the KTS 670 by
pressing the  On/Off key and the # Windows start
menu key (see Fig. 2) at the same time for at least
three seconds.
459764/45Wo
Operation | KTS ��� | 2�
KTS ��� | 2�
"Diagnostics
Software Installation" is only
 On/Off button, the KTS 670 is
# key, the Windows start menu is ope-
Exit Windows" in the Diagnostics
|
1 689 989 017
| 2�
en
2008-07-04

Publicidad

Tabla de contenido
loading

Tabla de contenido