Basic Installation - Clarity Alto PLUS Manual De Uso

Basic Installation

Step 1: Install the backup batteries (optional) by removing the battery cover as shown in
Figure 1.
Step 2: Pull the ends of the phone cord to untable the cord; connect the loose end of the
phone cord into your wall telephone outlet .
Step 3: Place handset in cradle .
Step 4: Pull the ends of the power cord apart to untangle the cord; plug the adapter into
your wall's electrical outlet .
IMPORTANT: Use only with Class (Classe) 2 power source, provided with your
product .
Step 5: When finished, lift handset to test . If you hear a dial tone, your telephone is ready
for use . If not, check all connections again .
Figure 1
If there is a power outage, the AltoPlus will maintain its full amplification for up to 48 hours with
four AA alkaline backup batteries (not included) .
The phone operates as a regular phone if there is no power or backup batteries . In this case, the
indicator lights, the loud ringer, the lighted keypad and the amplification will be disabled; you will still
be able to make and receive phone calls, but the extra amplification will not be engaged .
We recommend installing batteries if you live in an area with frequent power outages .
ALTOPLUS INSTALLATION
Figure 2
9