Adjusting The Cutting Depth; Adjusting The Cutting Angle; Adjust Pendulum Guard - Festool HK 55 EQ Manual De Instrucciones

Current limiting
Current limiting prevents excessive current con-
sumption under extreme overload, which can lead
to a decrease in the motor speed. The motor imme-
diately restarts after the load is removed.
Restart protection
The integral restart protection prevents the electric
power tool from automatically starting up again af-
ter an interruption in power when the ON/OFF
switch is pressed. In this case the electric power
tool must be switched off and then switched back
on again.
Temperature cut-out
When exceeding a certain engine temperature lev-
el, the machine power supply and speed are
capped. The power tool continues operating at re-
duced power to allow the ventilator to cool the mo-
tor rapidly. The power tool resumes to full perfor-
mance automatically once the motor has cooled
sufficiently.

Adjusting the cutting depth

The cutting depth can be set at 0 – 55 mm.

Press cutting depth adjustment [3-1].

Pull up or push down saw at main handle.
Cutting depth without guide rail/cross cut-
ting guide rail
max. 55 mm
Cutting depth with guide rail/cross cutting
+FS
guide rail
max. 51 mm
3
+FS
14

Adjusting the cutting angle

 The saw table must be on an even surface when
adjusting the cutting angle.
between 0° and 50°:

Open knob [4-2].

Swivel sawing unit to the desired cutting angle
[4-1].

Close knob [4-2].
 Both positions (0° and 50°) are set at the factory
and can be readjusted by the after-sales service
team.
 For angled cuts, the cutting depth is smaller
than the value displayed on the cutting depth
scale.
4

Adjust pendulum guard

Risk of injury! Sharp edges! The pendulum
guard swings back quickly in the event of
sudden release.
The pendulum guard [1-6] must only be opened
3-1
with the retractor lever [1-4].
Changing the saw blade
Risk of injury, electric shock

Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
WARNING
0° - 50°
4-1
4-2